Hyundai Santa Fe Owners Manual

Cruise control system
Driving your vehicle / Cruise control system

Hyundai Santa Fe: Cruise control system. 1.Cruise indicator

1.Cruise indicator
2.Cruise set indicator

The cruise control system allows you to program the vehicle to maintain a constant speed without depressing the accelerator pedal.

This system is designed to function above approximately 25 mph (40 km/h).

WARNING

  • If the cruise control is left on, (CRUISE indicator light in the instrument cluster is illuminated), the cruise control can be switched on accidentally. Keep the cruise control system off (CRUISE indicator light OFF) when the cruise control is not in use, to avoid inadvertently setting a speed.
  • Use the cruise control system only when driving on open highways in good weather.
  • Do not use the cruise control when it may not be safe to keep the vehicle at a constant speed, for instance, driving in heavy or varying traffic, or on slippery (rainy, icy or snowcovered) or winding roads or over 6% up-hill or down-hill roads.
  • Pay particular attention to the driving conditions whenever using the cruise control system.
  • Be careful when driving downhill using the cruise control system, which may increase the vehicle speed.

✽ NOTICE

  • During normal cruise control operation, when the SET switch is activated or reactivated after applying the brakes, the cruise control will energize after approximately 3 seconds. This delay is normal.
  • To activate cruise control, depress the brake pedal at least once after turning the ignition switch to the ON position or starting the engine. This is to check if the brake switch which is important part to cancel cruise control is in normal condition.


© 2018 www.hyundaisantafemanual.com. All Rights Reserved.